Radial Clearance Adjustment Method of Cylindrical Roller Bearings
Release time:
2023-09-04
The commonly used methods to adjust the radial clearance of full complement cylindrical roller bearings are as follows:
1. For the side clearance of cylindrical and elliptical bearings, it can be adjusted by manual scraping or the method of trimming and scraping after turning the face of the bearing and padding.
2. For the top clearance of cylindrical and elliptical bearing pads, it can be adjusted by manual scraping or adding pads to the bearing surface when the situation permits.
3. For multi-oil wedge fixed bearing pads, in principle, it is not allowed to repair and adjust the gap between the bearing pads. If the gap is not suitable, replace it with a new one.
4. For the multi-oil wedge tilting bearing pad, it is not allowed to repair the scraping pad, and the pad should be replaced if the gap is not suitable. For tiles with adjustable thickness, the amount of tiles can be adjusted by adding a stainless steel pad under the adjustment block behind the tile, or by thinning the thickness of the adjustment block. Note that for multi-oil wedge tilting bearing pads, the thickness error between pads in the same group should be less than 0.01mm.
Latest News
Precautions for deep groove ball bearings
2023-09-04
Cylindrical roller bearing product features
2023-09-04
CONTACT US
Email : davey@arswbearing.com
Tel：+86-13375904321
Whatsapp: 8613375904321
Copyright : Shandong Yuxinsheng Bearing Co., Ltd. Powerby : 300.cn jinan2 Seo Tags 【Business license】
